Saturday, 1 April 2017

Client PTC Certificate Registration Problem and its Solution

In some systems having the following problem
Copy new certificate replacing old one. 
  • Copy registerCAcft.exe from eMO client folder to all other folders. 
  • Double click registercacft.exe and click yes. 
  • Now run communication. Sometimes it won't run. 
  • If so right click on certificate select install next select second radio button and trusted root certification authorities and next next finish. 
Now try again. For DET do the same delete any files in data folder outside txd and also inside txd and run.

The Installation of New certificate is not possible better to change the communication modules in some other PCs.
Thanks to Rajesh C.R
Extracted From



Sunday, 1 September 2013

Details of 10 Years National Saving Scheme, NSC (IX-Issue) introduced with effect from 1-12-2011

Details of 10 Years National Saving Scheme, NSC (IX-Issue) introduced with effect from 1-12-2011

  • 10Years NSC (IX) issue has been introduced with effect from 1-12-2011. The new certificate are being issued from this date onwards.
  • The Certificates will be in denomination of Rs.100, Rs.500, Rs.1,000/-, Rs.5,000/- & Rs.10,000/-.
  • The Certificate shall mature after period of 10 years and investment of Rs.100/- shall fetch Rs.234.35 on expiry of 10 years.
  • Interest is calculated @8.7% compounded half yearly
  • Interest accruing at the end of the year shall be as per table/chart given below
The year for which interest accruesAmount of Interest accruing On Certificate or Rs.100/-
First Year8.89
Second Year9.68
Third Year10.54
Fourth Year11.48
Fifth Year12.50
Sixth Year13.61
Seventh Year14.82
Eighth Year16.13
Ninth Year17.57
Tenth Year19.13
Total Interest134.35
Maturity Value234.35
  • The interest on certificate shall be liable to Income Tax on annual accrual on basis as per table above. No tax shall be deducted at the time of payment of discharge value
  • Certificate can be en-cashed any time. If certificate is en-cashed before one year from date of purchase, only Face Value will be received without any interest. If the certificate is en-cashed after one year but before 3 years, NSC will be en-cashed at discount, i.e. face value will be paid and interest will be paid simple interest at rate of interest applicable to post office saving account form time to time. In case of premature encashment/repayment after 3 year the amount will be paid as follows.
Period of HoldingAmount receivable inclusive of interest  Rs.
3 Year to less than 3 Year 6 Months123.14
3 Years 6 Months to less then 4 Years127.49
4 Year to less than 4 Year 6 Months131.99
4 Years 6 Months to less then 5 Years136.65
5 Year to less than 5 Year 6 Months143.81
5 Years 6 Months to less then 6 Years149.13
6 Year to less than 6 Year 6 Months154.65
6 Years 6 Months to less then 7 Years160.37
7 Year to less than 7 Year 6 Months166.3
7 Years 6 Months to less then 8 Years172.46
8 Year to less than 8 Year 6 Months178.84
8 Years 6 Months to less then 9 Years185.46
9 Year to less than 9 Year 6 Months192.32
9 Years 6 Months to less then 10 Years199.43
on completion of Tenth Year234.35
  • The certificate can be held in Single name of an adult or on behalf of a minor, jointly by two adults payable to both jointly or to the survivor (Joint ‘A’ Type Certificate)  or jointly by two adults, payable to either of the holders or survivor (Joint ‘B’ Type Certificate).
  • Non Resident Indians will not be eligible to purchase these NSC.
  • The NSC can be purchased from Post-office by payment in cash, or locally drawn cheque, or withdrawal from post officer saving account or  surrender of old certificate.
  • Certificate shall be issued immediately when payment is made in cash and where payment is made by cheque, the certificate shall be issued after realising proceeds of the cheque
  • The certificate can also be pledged to Government Authorities.
  • Nomination facilities are also available for certificate of value of Rs.500/- and above. Nomination  can be made at time of purchasing the certificate or any time thereafter. Variation and Cancellation of Nomination is also possible.
  • The certificate shall be liable to Income Tax on basis of annual accrual on basis of table above. No tax shall be deducted at the time of payment of discharge value.
  • Deduction u/s. 80C is not available as no notification has yet been issued under Income Tax Act

    NSC Interest Calculator
    Chart to calculate accrued NSC interest

Wednesday, 31 July 2013

Weblink latest version: 9

Weblink latest version: 9

Release Date: 24.07.13

What is new?:

Option to enable and disable:
1.Browserbar on Taskbar 
2.Autostart with windows.
3.Quicknotes added.

Options are provided in menu-About. 

Source :

Point of Sale Submit Account Error

       While do Point of sale Submit account it shows an error message " Run-time error '13': Type mismatch. " then Run-time error '440': Automation error. so that we can not do submit account in point of sale module.


  • Type mismatch error occurs when article/ transaction made/done without receipt number.
  • So that While give submit account it shows type mismatch, run-time error '13'.
  • To find out that transaction just view detailed transaction report in Point of sale.
  • add article/transaction receipt number in counter DB with proper permission getting from DO.

Preventive measure: 
ensure that Barcode option checked for both Foreign and register article.

Check receipt number in Point of sale supervisor.


CTRL+(     : Unhides any hidden rows within the selection.
CTRL+)     : Unhides any hidden columns within the selection.
CTRL+~    :Applies the General number format.
CTRL+$    :Applies the Currency format with two decimal places (negative numbers in parentheses). 
CTRL+%   :Applies the Percentage format with no decimal places.
CTRL+^    : Applies the Exponential number format with two decimal places.
CTRL+#    :Applies the Date format with the day, month, and year.
CTRL+@   : Applies the Time format with the hour and minute, and AM or PM.
CTRL+!     : Applies the Number format with two decimal places, thousands separator, and minus sign (-) for negative values. 

CTRL+-     :Displays the Delete dialog box to delete the selected cells.
CTRL+*    :Selects the current region around the active cell (the data area enclosed by blank rows and blank columns).
CTRL+:     :Enters the current time.
CTRL+ ;    :semicolon Enters the current date.
CTRL+Alt  : Alternates between displaying cell values and displaying formulas in the worksheet.
CTRL+ Apostrophe - Copies a formula from the cell above the active cell into the cell or the Formula Bar.
CTRL+ Quote -Copies the value from the cell above the active cell into the cell or the Formula Bar.
CTRL+&    : Applies the outline border to the selected cells.
CTRL+_    :Removes the outline border from the selected cells.
CTRL++    :Displays the Insert dialog box to insert blank cells.
CTRL+1    : Displays the Format Cells dialog box.
CTRL+2    :Applies or removes bold formatting.
CTRL+3    :Applies or removes italic formatting.
CTRL+4    :Applies or removes underlining.
CTRL+5    :Applies or removes strikethrough.
CTRL+6    :Alternates between hiding objects, displaying objects, and displaying placeholders for objects.
CTRL+7    :Displays or hides the Standard toolbar.
CTRL+8    : Displays or hides the outline symbols.
CTRL+9    :Hides the selected rows.
CTRL+0    :Hides the selected columns.
CTRL+A    :Selects the entire worksheet. With Data- CTRL+A Selects the entire worksheet.
CTRL+SHIFT+A          :inserts the argument names and parentheses when the insertion point is to the right of afunction name in a formula.
CTRL+B    : Applies or removes bold formatting.
CTRL+C    :Copies the selected cells.
CTRL+C followed by another CTRL+C displays the Microsoft Office Clipboard.
CTRL+D    : Uses the Fill Down command to copy the contents and format of the topmost cell of a selected range into the cells below.
CTRL+F     :Displays the Find dialog box.
SHIFT+F5 : Also displays this dialog box, while SHIFT+F4 repeats the last Find action.
CTRL+G    : Displays the Go To dialog box.
F5 also displays this dialog box.
CTRL+H    :Displays the Find and Replace dialog box.
CTRL+I     :Applies or removes italic formatting.
CTRL+K    :Displays the Insert Hyperlink dialog box for new hyperlinks or the Edit Hyperlink dialog box for selected existing hyperlinks.
CTRL+L     :Displays the Create List dialog box.
CTRL+N    :Creates a new, blank file.
CTRL+O    :Displays the Open dialog box to open or find a file.
CTRL+SHIFT+O selects all cells that contain comments.
CTRL+P    :Displays the Print dialog box.
CTRL+R    :Uses the Fill Right command to copy the contents and format of the leftmost cell of a selected range into the cells to the right.
CTRL+S     :Saves the active file with its current file name, location, and file format.
CTRL+U    : Applies or removes underlining.
CTRL+V    :Inserts the contents of the Clipboard at the insertion point and replaces any selection.
Available only after you cut or copied an object, text, or cell contents.
CTRL+W   :Closes the selected workbook window.
CTRL+X    :Cuts the selected cells.
CTRL+Y    :Repeats the last command or action, if possible.
CTRL+Z     :Uses the Undo command to reverse the last command or to delete the last entry you typed.
CTRL+SHIFT+Z          : uses the Undo or Redo command to reverse or restore the last automatic correction when AutoCorrect Smart Tags are displayed.
F1 Displays the Help task pane.
CTRL+F1 :closes and reopens the current task pane.
ALT+F1     : creates a chart of the data in the current range.
ALT+SHIFT+F1 inserts a new worksheet.
F2 Edits the active cell and positions the insertion point at the end of the cell contents. It also
moves the insertion point into the Formula Bar when editing in a cell is turned off.
SHIFT+F2       :Edits a cell comment.
F3 Pastes a defined name into a formula.
SHIFT+F3 :Displays the Insert Function dialog box.
F4 Repeats the last command or action, if possible.
CTRL+F4  : closes the selected workbook window.
F5 Displays the Go To dialog box.
CTRL+F5  : restores the window size of the selected workbook window.
F6 Switches to the next pane in a worksheet that has been split (Window menu, Split command).
SHIFT+F6       :switches to the previous pane in a worksheet that has been split.
CTRL+F6 :switches to the next workbook window when more than one workbook window is open.
When the task pane is visible, F6 and SHIFT+F6 include that pane when switching between panes.
F7 Displays the Spelling dialog box to check spelling in the active worksheet or selected range.

CTRL+F7 :Performs the Move command on the workbook window when it is not maximized. Use the arrow
keys to move the window, and when finished press ESC.
F8 Turns extend mode on or off. In extend mode, EXT appears in the status line, and the arrow keys
extend the selection.
SHIFT+F8 : Enables you to add a non-adjacent cell or range to a selection of cells by using the arrow keys.
CTRL+F8 :Performs the Size command (on the Control menu for the workbook window) when a workbook is not
ALT+F8     :Displays the Macro dialog box to run, edit, or delete a macro.
F9 Calculates all worksheets in all open workbooks.
F9 followed by ENTER (or followed by CTRL+SHIFT+ENTER for array formulas) calculates the selected a portion of a formula and replaces the selected portion with the calculated value.
SHIFT+F9       :Calculates the active worksheet.
CTRL+ALT+F9           :Calculates all worksheets in all open workbooks, regardless of whether they have changed
since the last calculation.
CTRL+ALT+SHIFT+F9 rechecks dependent formulas, and then calculates all cells in all open workbooks,
including cells not marked as needing to be calculated.
CTRL+F9 :Minimizes a workbook window to an icon.
F10 Selects the menu bar or closes an open menu and submenu at the same time.
SHIFT+F10 displays the shortcut menu for a selected item.
ALT+SHIFT+F10 displays the menu or message for a smart tag. If more than one smart tag is present, it
switches to the next smart tag and displays its menu or message.
CTRL+F10 maximizes or restores the selected workbook window.
F11 Creates a chart of the data in the current range.
SHIFT+F11 inserts a new worksheet.
ALT+F11 opens the Visual Basic Editor, in which you can create a macro by using Visual Basic for
Applications (VBA).
ALT+SHIFT+F11 opens the Microsoft Script Editor, where you can add text, edit HTML tags, and modify any script code.
F12 Displays the Save As dialog box.
ARROW KEYS Move one cell up, down, left, or right in a worksheet.
CTRL+ARROW KEY moves to the edge of the current data region (data region: A range of cells that contains
data and that is bounded by empty cells or datasheet borders.) in a worksheet.
SHIFT+ARROW KEY extends the selection of cells by one cell.
CTRL+SHIFT+ARROW KEY extends the selection of cells to the last nonblank cell in the same column or row
as the active cell.
LEFT ARROW or RIGHT ARROW selects the menu to the left or right when a menu is visible. When a submenu
is open these arrow keys switch between the main menu and the submenu.
DOWN ARROW or UP ARROW selects the next or previous command when a menu or submenu is open.
ALT+DOWN ARROW opens a selected drop-down list.
BACKSPACE Deletes one character to the left in the Formula Bar.
DELETE Removes the cell contents (data and formulas) from selected cells without affecting cell formats
or comments.
END Moves to the cell in the lower-right corner of the window when SCROLL LOCK is turned on.
CTRL+END moves to the last cell on a worksheet, in the lowest used row of the rightmost used column.
CTRL+SHIFT+END extends the selection of cells to the last used cell on the worksheet (lower-right corner)
ENTER Completes a cell entry from the cell or the Formula Bar, and selects the cell below (by default).
ENTER In a data form, it moves to the first field in the next record.
ALT+ENTER starts a new line in the same cell.
CTRL+ENTER fills the selected cell range with the current entry.
SHIFT+ENTER completes a cell entry and selects the cell above.
ESC Cancels an entry in the cell or Formula Bar.
HOME Moves to the beginning of a row in a worksheet.
CTRL+HOME moves to the beginning of a worksheet.
CTRL+SHIFT+HOME extends the selection of cells to the beginning of the worksheet.
PAGE DOWN Moves one screen down in a worksheet.
ALT+PAGE DOWN moves one screen to the right in a worksheet.
CTRL+PAGE DOWN moves to the next sheet in a workbook.
CTRL+SHIFT+PAGE DOWN selects the current and next sheet in a workbook.
PAGE UP Moves one screen up in a worksheet.
ALT+PAGE UP moves one screen to the left in a worksheet.
CTRL+PAGE UP moves to the previous sheet in a workbook.
CTRL+SHIFT+PAGE UP selects the current and previous sheet in a workbook.
SPACEBAR In a dialog box, performs the action for the selected button, or selects or clears a check box.
CTRL+SPACEBAR selects an entire column in a worksheet.
SHIFT+SPACEBAR selects an entire row in a worksheet.
CTRL+SHIFT+SPACEBAR selects the entire worksheet.
If the worksheet contains data, CTRL+SHIFT+SPACEBAR selects the current region. Pressing CTRL+SHIFT+SPACEBAR a second time selects the entire
When an object is selected, CTRL+SHIFT+SPACEBAR selects all objects on a worksheet.
ALT+SPACEBAR displays the Control menu for the Excel window.
TAB Moves one cell to the right in a worksheet.
Moves to the next option or option group in a dialog box.
SHIFT+TAB moves to the previous cell in a worksheet or the previous option in a dialog box.
CTRL+TAB switches to the next tab in dialog box.
CTRL+SHIFT+TAB switches to the previous tab in a dialog box.

Courtesy :